This will output the health status of the storage drive that you have scanned in Terminal. So, for example, I will be scanning “disk2” here. Make sure to add the BSD device node of the hard disk you want to scan at the end. Step 3: Open Terminal and paste the below command. Step 2: Check the BSD device node of the storage drive as this is the mount point that smartmontools will scan to assess the drive’s health. Step 1: Launch Disk Utility. Proceed to right-click on the storage drive from the left pane followed by Get Info. The simplest way of doing it is via Disk Utility. If you want to run smartmontools manually again to check the health of another hard disk or SSD on your Mac, you will first have to find its mount point. Use Smartmontools to Get Detailed Health Status of Your Mac’s SSD The log will provide an in-depth S.M.A.R.T status of your hard disk. Step 4: After smartmontools is installed, it will automatically scan the “/disk0” SSD on your Mac and output its health details. Simply copy-paste the following command in Terminal and press Return:īrew install smartmontools & sudo smartctl –all /dev/disk0ĭuring the installation process, you’ll be prompted to enter your Mac’s password. Step 3: With Homebrew installed, it is now time to install Smartmontools on your Mac. Depending on the internet connection’s speed and your Mac’s age, this process can take a while. You can simply press Enter to proceed with the Xcode and Homebrew installation. In case Xcode is not already installed in your Mac, you will be prompted to do in Terminal. Open Terminal and copy-paste the following command: Step 1: Download and install Xcode on your Mac. If you want to see even more details regarding your M1 Mac’s SSD’s health, you will need to use Smartmontools. In the bottom pane window, see the S.M.A.R.T Status of the drive. If it is being reported as “Verified,” your Mac’s SSD has no serious issues. Step 3: Click on the SSD name under Volume Name from the right pane window. This will show all the hard disks attached to your Mac. Step 2: In the System Report window, select Storage under Hardware from the left pane. From the window that opens, click on System Report…. Step 1: Click on the Apple logo on the top-left corner of your Mac, followed by About this Mac. The second involves using a utility called Smartmontools, which needs to be run through the Terminal. One is via the built-in System Report feature in macOS. There are two ways you can check the health of the SSD on your M1 Mac. This means that if the SSD in your Mac stops working, you won’t be able to retrieve the data stored on it. Due to the way Macs are engineered, each SSD is tied to the logic board. If the SSD is under heavy stress, you should backup all your data on it in case it fails. It is important to check your Mac’s SSD’s health, irrespective of whether you are using an Intel or M1-based Mac. If you are worried about your Mac’s SSD health, here’s how you can check it. It was recently reported that the SSD usage on M1 Macs is unnecessarily high, which could greatly shorten their lifespan. However, they are not without their fair share of issues. Apple’s M1 Macs have set a new standard with their performance and battery life.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |